LW600FV loader is equipped with XCMG dedicated Weichai engine, XCMG electronic control transmission, and XCMG patented automatic power distribution (APD) hydraulic system. The steering plunger pump can, based on different working conditions and statuses of the loader, supplies the oil of different pressures and flows to the working system and steering system to automatically optimize the shares of engine power for drive system and hydraulic system, reduce the fuel consumption, and remarkably improve the working efficiency of machine.
Performance Highlights: The ≥17.4t traction force and ≥20.5t breakout force conquer all kinds of severe working conditions.
The 38° steering angle and the 3,350mm wheelbase adapt to diversified narrow working sites.
Model Characteristics: Electronic control transmission - XCMG heavy-duty electronic control countershaft transmission is in line with the international level in terms of reliability, operation comfort, multi-functionality, and technologic advancement and has gained multiple national patents.
Integrated cab - The super-large, full-view, ultra-low noise, and slightly pressurized cab is fitted with audio system and A/C, the joysticks are under follow-up status with the seat, and all control units are easily accessible to build the best operating environment.
Lightweight design technology - XCMG's exclusive high strength skeleton frame system is applied and the dynamics simulation research, the in-depth finite element analysis, and the lightweight design are taken to realize that the "load-carrying material ratio” is remarkably leading the industry products.
Patented bushing lubrication technology - The industry’s pioneering bushing lubrication structure is applied to prolong the life of the hinge pins by more than one time.
Patented double-limit technology - The combination mode of primary flexible limit and secondary rigid limit attenuates the impact onto the frame and improves the operation comfort.
| 项目 | 参数 | 单位 |
| Description | Specification | Unit |
| 卸载高度(地面至主刀板) | 3170-3750 | mm |
| Dumping heigh (Ground to main cutting blade) |
| 卸载距离(前轮至主刀板) | 1200-1360 | mm |
| Dumping range (Front wheels to main cutting blade) |
| 轴距 | 3350 | mm |
| Wheelbase |
| 轮距 | 2265 | mm |
| Wheel tread |
| 最大提升时的铰轴高度 | 4190 | mm |
| Hinge height at maximum lifting height |
| 最小转弯半径(轮胎中心) | 6005 | mm |
| Minimum turning radius (tire center) |
| 整机外形尺寸(长×宽×高) | 8505*3200*3515 | mm |
| Overall machine dimensions (L×W×H) |
| 额定载荷 | 6000 | kg |
| Rated load |
| 斗容量 | 3.0-4.5 | m3 |
| Bucket capacity |
| 整机工作质量 | 20000 | kg |
| Operating mass |
| 工作高度 | 5550 | mm |
| Working height |
| 最大掘起力 | 205 | kN |
| Maximum breakout force |
| 最大牵引力 | 174 | kN |
| Maximum traction force |
| 动臂提升时间 | ≤5.9 | s |
| Lifting time of boom |
| 三项和时间 | ≤10.9 | s |
| Total cycle time |
| 爬坡能力 | 28 | ° |
| Gradeability |
| 轮胎规格 | 23.5-25 | |
| Tire specification |
| 发动机型号 | WP10G240E341 | |
| Engine model |
| 排放标准 | 国三 | |
| Emission standard | China-III |
| 额定功率/转速 | 178/2200 | kW/rpm |
| Rated power/speed |
| 燃油箱容量 | 300 | L |
| Oil tank capacity |
| 液压油箱容量 | 187 | L |
| Hydraulic oil tank capacity |
行驶速度
Traveling speed | 一档(前进/后退) | 6月6日 | km/h |
| Gear I (Drive/reverse) |
| 二档(前进/后退) | 11月11日 | km/h |
| Gear II (Drive/reverse) |
| 三档(前进/后退) | 20/20 | km/h |
| Gear III (Drive/reverse) |
| 四档(前进/后退) | 34/34 | km/h |
| Gear IV (Drive/reverse) |