1.The GR215 AVII motor grader adopts Dongkang 6CTA8.3-C215 turbocharged diesel engine with large output torque and power reserve coefficient and low fuel consumption.
2.The gearbox and torque converter are 6WG200 electronically controlled power shift and fixed shaft transmissions produced by Liuzhou ZF. The torque converter has a large torque coefficient, high efficiency, and a wide range of high efficiency. It has good joint performance with engine matching.
3.The drive axle is the Meritor post-production axle.
4.Rear axle main drive is equipped with "NO-SPIN" without self-locking differential.
5.The front steering of the machine adopts a load-sensing full hydraulic steering device.

Description		Unit	Parameter value
Engine model			6CTA8.3-C215
Rated power/speed		kW/rpm	160/2200
Overall dimension (standard)			8970x2625x3420
Total weight (standard)		kg	16100
Tire specification			17.5-25
Ground clearance (front axle)		mm	430
Tread		mm	2156
Space of front and rear axles		mm	6219
Space of middle and rear wheels		mm	1538
Forward velocity		km/h	5/8/11/19/23/38
Reverse speed		km/h	5/11/23
Tractive effort f=0.75		kN	113.8
Maximum gradeability		%	30
Tire inflation pressure		kPa	260
Working system pressure		MPa	18
Transmission pressure		MPa	1.3—1.8
Maximum steering angle of front wheel			±50°
Maximum slant angle of front wheel			±17°
Maximum oscillating angle of front axle			±15°
Maximum oscillating angle of equilibrium box			Front15°、Rear15°
Maximum steering angle of frame			±27°
Minimum turning radius		m	7.3
Scrape knife	Maximum lift height	mm	450
	Maximum cutting depth	mm	500
	Maximum tilt angle		90°
	Cutting angle		28°—70°
	Angle of revolution		360°
	Length & chord height	mm	4270x610
Coolant		L	50
Fuel tank		L	280
Engine		L	24
Transmission		L	38
Hydraulic oil		L	220
Drive axle		L	28
Balancing box		L	46