XTC80-55 Trench Cutter Double winches with single row structure are set inthe front and back so as to improve the service life of wire rope effectively;
Equipped with our own special chassis, which has alarge spread width and long chain tread. This chassis can improve the steppingability and the constructing stability of the machine.
Advanced technology of setting milling teeth and theputting tooth blind area milling mechanism with proprietary technology ensurethe efficiency of construction.
Gas lift reverse circulation discharge mode reducesthe fuel consumption and construction cost effectively.
Self-developed milling wheel drive structure has someadvantages, such as: getting spare parts more easily, low maintenance cost andsaving time.
With the function of one machine has two used anddismounting conveniently, it can be in common use with the main engine ofXG600D hydraulic diaphragm wall grab.
| Item
| Index
|
| Trench width
| 800—1200 mm
|
| Max. wall depth
| 55 m
|
| Trench length
| 2800 mm
|
| Trench accuracy
| 3‰
|
| Max. torque
| 2×80 kN.m
|
| Rotary speed
| 0~23 r/min
|
| Max. hoisting force
| 2×300 kN
|
| Max. hoisting speed
| 40 m/min
|
| Rope diameter
| Φ36 mm
|
| Slag discharge way
| air-lift reverse circulation
|
| Type of Base Machine
| Multifunction machine
|
| Work radius
| 4800~5800 mm
|
| System pressure
| 32 Mpa
|
| Engine Model
| CUMMINS QSM11
|
| Engine Rata Power
| 298/2100 kW/r/min
|
| Track outer width
| 3500—4900 mm
|
| Track shoe width
| 800 mm
|
| Max. traveling speed
| 1.2 km/h
|
| Max. grade ability
| 35%
|
| Min. clearance
| 450 mm
|
| Machine Size of Working condition
| 10805×6575×18914 mm
|
| Machine Size of Walking state
| 16120×3500×3800 mm
|
| Total weight
| 140 t
|