EBZ200R Roadheader EBZ200R roadheader is designed as compact structure, low body, lowcenter of gravity. easy operation, good working performance.
1、Electric control system EBZ200R roadheader adol11ts flame proof and intrinsically safe switchbox and control box with small size, light weight, flexible operation, which issafety and reliable: main controller is installed in a closed casing that caneffectively block out electromagnetic interference; working condition is shownwith LCD screen, menu mode is used for operating interface with flexible andsafe parameter setting; it is equipped with functions such as overvoltage,motor overload, open-phase, short circuit, over temperature and earth leakagelockout.
2、Hydraulic system The hydraulic system of EBZ200R roadheader adopts transfer case,several pumps control, with main hydraulic components coming from internationalbrands.
3、Cutting head The cutting head is optimized by utilizing simulation technique andpicks come from Kennametal Co., Ltd. With reasonable layout and strong rockbreaking capacity.
4、Spraying system Spraying system of EBZ200R roadheader include inside and outside spraysystems, of which the front is after-pick spraying which is used to strengthoutside spraying, the latter is reasonable in design and equipped with leakagedetection function.
5、First freighter Straight structure is adopted for first freighter, which can achievesmooth lapping with hauler bed and transportation.
6、Traveling mechanism The traveling mechanism is a high integration of internationallyadvanced motor and reducer, whose big output torque can adapt to operationswith large dip angle.
If there is limit for weight or total weight during transportation, itcan be disassembled for transportation.
| Item
| Index
|
| Overall weight
| 80000 kg
|
| dinting undercut
| 225 mm
|
| Ground clearance of machine
| 220 mm
|
| Height of Range of positioning cutting
| 4800 mm
|
| Width of Range of positioning cutting
| 6040 mm
|
| Area of Range of positioning cutting
| 29 m²
|
| Gantry height
| 400 mm
|
| Compressure strength of coal petrography to be cut
| ≤100/80 Mpa
|
| Climbing capacity
| ±18°
|
| Travelling speed
| 7 m/min
|
| Min. turning radius
| —
|
| Grounding pressure
| 0.15 Mpa
|
| Gross power
| 387 kW
|
| Power of Cutting motor
| 200/150 kW
|
| Power of pumping stations motor
| 132 kW
|
| Supply voltage
| AC1140V
|
| Frequency of supply
| 50Hz
|
| Rotation speed of cutting head
| 46/23 r/min
|
| Loading capacity
| Star wheel type/4.3 m³/min
|
| Crawler width
| 650 mm
|
| Out. Width of crawlers
| 2700 mm
|
| Tensioning style
| Cylinder tensioning and snap-gauge locking
|
| Water pressure of outside spraying
| ≥2.5 MPa
|
| Water pressure of inside spraying
| ≥3 MPa
|
| Max. non-removable parts size
| 3.68×1.39×1.48 m
|
| Max. non-removable parts mass
| 8500 kg
|