On the basis of common wrecker, XCMG XZJ5120TQZD5 faltbed type wrecker is equipped with a loader crane, increased hoisting function. It is mainly used to lift accident car or breakdown car to the platform for backloading, and assist the underlift to carry on towing and loading work. Since the parking space of accident car or breakdown car in urban district, mountain road outside where the vehicle fall off restricted the operation of platform and underlift, the machine solved the limitations that the common flatbed type wrecker can’t hoist and remove barrier, realized multiple uses in one unit.
Product Highlights:
1.The machine combines backloading, transportation , pulling and hoisting functions, a unit serves several purpose. Work condition adaptability is strong with high rescue efficiency .
2.Adopt hinged three-level platform structure, that can minimize the inclination angle between flat and ground, safe carry the vehicle with low front suspension and small approach angle.
3.Full-extended underlift tip down 2~3°, can safe lift the vehicle with low, long front suspension and small approach angle
4.A wide range of optional loader crane is offered, in which QQZ140A loader crane has the advantages of short, flat and quick. Telescopic + knuckle boom make minimum operation range small, and operation is steady and agile.
| 项目 | 单位 | 参数 |
| Item | Unit | Parameter |
| 最大总质量 | kg | 12495 |
| Max. total mass |
| 平板最大承载质量 | kg | 5000 |
| Maximum load |
| 平板尺寸(长×宽) | mm | 6290×2480 |
| flat dimensions(L×W) |
| 托臂最大托举质量 | kg | 5000 |
| Maximum lifting capacity of under-lift |
| 托臂最大有效长度 | mm | 2015 |
| Maximum operation length of under-lift |
| 整机外廓尺寸(长×宽×高) | mm | 9675×2480×3440 |
| unit dimensions(L×W×H) |
| 最大额定起升质量 | kg | 5300 |
| Max. rated lift capacity |
| 最大工作幅度 | m | 9.53 |
| Max. working range |
| 最小工作幅度 | m | 2.48 |
| Min. working range |
| 最大起升高度 | m | 12.2 |
| Max. lifting height |
| 回转范围° | ° | 370 |
| Rotation range |
| 变幅范围° | ° | 0~70 |
| Derricking range |